LC2i |
LC2i Pro |
Inputs |
|
Speaker
Level Input: 1 (2 channels) |
Speaker
Level Input: 1 (2 channels) |
Maximum
Speaker Level Input: 400W per channel at 4Ohm |
Maximum
Speaker Level Input: 40 Vrms / 400 W (20k ohm setting) |
Input
Impedance: 20k Ohm |
Input
Impedance (selectable): 20 ohms, 60 ohms, 20k ohm outputs |
|
|
Outputs |
|
Preamp
Outputs: 2 (2 channels main, 2 channels bass) |
Preamp
Outputs: 2 (2 channels main, 2 channels bass) |
Maximum
Output Level: 9.5Vrms/13V peak |
Maximum
Output Level: 9.5Vrms/13V peak |
Output
Impedance: 150 Ohm |
Output
Impedance: 150 ohm |
Output Gain: +/- 12 dB |
Output
Gain: +/- 12 dB |
|
|
Performance |
|
Total
Harmonic Distortion: 0.01% |
Total
Harmonic Distortion: 0.01% |
Signal
to Noise: >110dB |
Signal
to Noise: >110dB |
Frequency
Response: 10Hz-100kHz ±1 dB |
Frequency
Response: 20 Hz – 50 kHz ±1 dB |
|
|
Control |
|
Remote
In |
Remote
In / GTO™ Signal Sense / Audio Sense |
12VDC
Remote Out (always active when the unit is on) |
12VDC
Remote Out (always active when the unit is on) |
|
|
General |
|
Current
Draw: 150mA |
Current
Draw: 200 mA |
Recommended
Fuse Rating: 1A |
Recommended
Fuse Rating: 1A |
|
|
Weights
& dimensions |
|
Dimensions:
5.4"L x 3.25"D x 1.5"H (6.5"L including mounting
brackets) |
Dimensions:
6.9 inches L x 3 inches D x 1 inch H (including speaker connectors) |
Weight:
1.0lbs (0.5kg) |
Weight:
0.75 lbs. (0.34 kg) |
|
|
Features |
|
Two channels of active speaker level inputs
(up to 40V input handling) |
Two
channels of active speaker level inputs (up to 40V input handling) |
Fixed and variable outputs with discrete level
controls |
Fixed
and variable outputs with discrete level controls |
AccuBASS® processing for correction of bass
roll-off |
AccuBASS®
processing for correction of bass roll-off |
Load Selection Switch |
Load
Selection Switch |
GTOTM Signal Sensing |
GTOTM
Signal Sensing |
|
Ground
Isolation Switch
ACR-1 dash remote included |
Compact design |
|