TP-90 Pro DIY Motorcycle Tyre Pressure Monitoring System from Steelmate


The award winning Steelmate TP-90 Pro DIY motorcycle tyre pressure monitoring system (TPMS) can be easily installed within 30 minutes. The system comes with 2 screw on sensors and a visual display that must be powered from a 12v ignition fed supply on the bike. The visual display shows in real time the current tyre pressures of both tyres in PSI/Bar format in a front and rear scrolling motion. 

The visual display provides audible and visual warnings when a tyre pressure drops below or raises above the user defined level. Both sensors come pre paired to the correct wheel position and are labelled for easy installation, simply screw the sensors onto the motorcycle valve stem then lock in place with the provided locknut and tool. The TP-90 Pro can show the motorcycle battery voltage on the visual display.



Technical parameters:

Operating Frequency: 433.92MHz
Battery Voltage: 3V
Battery Type: CR1632 (User Replaceable)
Operating Temperature: -20°C - +60°C
Pressure Range: 0-3.5 Bar / 0-50 Psi
High Pressure Value: 3.3 Bar/47 Psi
Low Pressure Value: 1.7 Bar/25 Psi

Operating Frequency: 433.92MHz
Operating Voltage: 12v (+/- 3v)
Operating Temperature: -40°C - +85°C

Driver Aids
  • TPS Tyre Pressure Monitor

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good

TP-90 Pro DIY Motorcycle Tyre Pressure Monitoring System from Steelmate

  • Brands Steelmate
  • Product Code: TP-90
  • Availability: Available
  • £99.99