Thinkware iVolt Mini External Battery Pack

Thinkware iVolt Mini External Battery Pack

Some vehicles may bring up a "Battery Discharge" warning on the dashboard is a Dashcam is left running in Parking Mode for several hours. This is due to the vehicles detecting excessive battery drain. 

Fitting a separate battery pack is a good solution.

This battery pack only has a Permanent Power & Ignition Supply going into it for charging (needs to sustain 9.4 amps) The battery pack fully charges to 90% or more in around 1 hour and can power a Single channel camera for approx 43 hours and a 2 channel camera for approx 32 hours. When the ignition is off permanent power to the camera is purely supplied from this battery.

Two versions available

Hardwire: Maximum performance for an entirely professional install

Plug & Play: For people concerned about their vehicle warranty, a plug & play version designed for non-invasive install.

Technical Info

• Input Power 12.0V – 15.5V / 10A MAX
  
• Output Voltage / Current 12.0V – 14.6V / 2.0A MAX
• Charging Voltage / Current 14.6V / 7A(Hardwire) or 14.6V / 5A(Cigar Jack)
• Charging Time About 45 minutes (by Hardwire to Fuse Box) - About 60 minutes (by Cigar Jack Power Cable)
• Usage Time 1ch: about 20 hours (2.9Wh) - 2ch: about 16 hours (3.5Wh)
• Battery LiFePo4 (Lithium iron phosphate)
• Battery Capacity 12.8V 4,500mAh 57.6Wh
• Product Dimension 165.4(W) x 131.2(L) x 36.8(H) / Weight: 0.95(kg)
• Operating Temperature Charging: 0°C~45°C
• Discharging: -10°C~60°C - (Cell skin temperature cannot exceed 80°C)
• Storage Temperature -10°C ~ 60°C
• Storage Humidity Range 65% ±20%RH
• (Recommended to store 23 ±5°C for long term)




NOTE: A Thinkware Hardwire Cable is needed to connect your Thinkware camera to either version of the iVolt Mini.