Blind Spot Detection System

The Steelmate SBS-1 blind spot detection system uses microwave sensors installed behind the rear bumper (one on each side) to warn the driver when a vehicle is in their blind spot.

When a vehicle is detected in the drivers blind spot the systems corresponding LED warning indicator (installed on the bottom of the windscreen pillar trims) will flash, if the driver is about to change lanes and is indicating an audible alert will sound. The system greatly reduces the possibility of a fatal accident caused while overtaking or changing lanes.

Features

  • Significantly reduces the risk of an accident when changing lanes on a motorway or dual carriageway
  • Detects vehicles in your blind spot that approach and pass you in either the left or right lane when indicating
  • Visual and audible alarm
  • Optimized vehicle detection algorythms
  • Suitable for 12v/24v vehicles
  • Current consumption <300mA
  • Cable lengths from ECU to displays approx 5.5 m and 6.5 m

Specifications

  • 2 x 79GHz microwave
  • IP67 – waterproof
  • No holes to drill for sensors
  • Detection range up to 5m
  • Mounting height 55cm (+/- 10cm)
  • Range of use (difference in vehicle speeds (relative speed): from 3.1 mph to 24 mph)

Kit Contents

  • 2 x Microwave sensors
  • 1 x ECU
  • 1 x ECU wiring loom
  • 1 x Visual display wiring loom
  • 2 x Visual displays (left & right)
  • 2 x Magnets
  • 2 x Alcohol wipes
  • 1 x Self adhesive pad
  • 1 x User Manual


There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Retrofit Aftermarket Blind Spot Detection System with LED Indicators

  • £224.99