Nissan NV200 (2010-2019) Double DIN stereo upgrade fitting kit (WITH SWC AND CAMERA RETENTION)

This head unit fitting kit includes:

USB retention cable (24-252)

Cable to retain the use of the original USB port when replacing the original head unit

Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit.

Camera retention interface (27-246)

Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on select Nissan car models, when replacing with a new aftermarket head unit.

This interface is compatible with various Nissan car models with an original factory fitted Navigation head unit with a 24pin connection.

Installation notes

• Connect the Yellow RCA connector of the camera interface to the camera input connection on the back of the aftermarket head unit.
• Connect the vehicle specific connector (24 Pin) to the cars original wiring harness. 
• Connect the loop on the Black wire of the camera interface to a chassis ground on the vehicle.
• Connect the Purple wire on the camera interface to the new aftermarket head units reverse signal wire. (Please refer to manufacturers instructions)

Steering wheel control interface (29-671)

Steering wheel control interface and adapter cable for Nissan Navara D40, NV200, Pathfinder, Patrol and Qashqai cars to fit an aftermarket radio upgrade.

The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

The steering wheel control interface is built in to the adapter cable for a plug and play installation.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons. (6 function steering wheels)

This interface fits cars with the newer 20 way car audio connector that has two larger size terminals at either end of the connector.
These radios will also have an additional smaller connector, this is used for CD changer and navigation audio. It is not used when changing the head unit.

Installation notes

• Connect male ISO(S) of the steering wheel control interface to the female ISO(S) of the aftermarket radio lead/head unit
• Loose black wire - Connect the radio ground earth ring to the vehicles chassis ground
• Loose pink wire - Connect the pink wire to the speed pulse connector on the aftermarket radio (Not all radios have this, please check manufacturers instructions)
• Loose blue wire (Amplifier turn-on) - This is only required on amplified systems such as BOSE.
• Loose blue wire (Antenna turn-on) - This needs to be connected to the antenna turn on cable on the antenna adapter cable (21-118k)

Universal patch lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.

Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Double DIN fascia adapter (50-644)