Match PP 62DSP 5/6 channel plug & play amplifier

MatchSKU: PP 62DSP

Price:
Sale price£399.99

Description

PP 62DSP

The PP 62DSP provides everything an up-to-date Plug Play amplifier needs: easy installation and maximum flexibility.

Its installation effortlessly takes place via Plug Play cable harness which is included in delivery  no cable has to be cut or modified. At www.audiotec-fischer.com the huge online sound setup database provides the appropriate setup.

The MATCH Extension Card (MEC) slot makes it possible to expand the PP 62DSP's functionality by inserting an optional MEC module - for example a Bluetooth Audio Streaming module, an optical digital input or an AUX input module. In addition the PP 62DSP offers the option of hooking up additional amplifiers using the two channel pre-amp output.

Sound enthusiasts get their moneys worth as well thanks to the professional and user-friendly Audiotec Fischer DSP PC-Tool software it becomes amazingly easy to create individual sound setups. Furthermore the PP 62DSP is optionally configurable as a 6-channel amplifier with a total of 8 DSP channels. Due to the numerous adjustment options it leaves nothing to be desired.

Simple Plug Play connection to original sound systems using vehicle-specific adapter cables
MATCH Extension Card (MEC) slot for additional input modules like Bluetooth Audio Streaming
Extremely powerful fixed point Audio DSP with 56 Bit resolution
Large database of car-specific setups online available
Optionally configurable as 6-channel amplifier with a total of 8 DSP channels
Freely configurable 2-channel Pre Out for the connection of additional amplifiers
Adjustable input sensitivity from 11V to 5V
Automatic remote switch
Smart highlevel input with ADEP circuit
Highlevel input EQs
Control input for optional cable remote control
State-of-the-art SMD technology for a more compact design and maximum reliability
Four-layer printed circuit boards for best possible power and signal transmission
Output power RMS / max.
at 4 Ohms 4 x 35 Watts / 70 Watts
at 2 Ohms 4 x 50 Watts / 100 Watts
Subwoofer output at 2 Ohms

1 x 160 Watts / 320 Watts
(4 channels each 40 / 80 Watts)

Frequency response 20 Hz - 22,000 Hz
Number of inputs 4 x Highlevel, 1 x MEC
DSP resolution 56 Bit
DSP processing power 172 MHz
Total harmonic distortion (THD) < 0.01 %
Signal-to-noise ratio 103 dB
Damping factor 100
Input impedance 13 Ohms
Input sensitivity 5 - 11 Volts
Dimensions
(H x W x D)

44 x 185 x 139 mm;
1.73 x 7.28 x 5.47

Special Features:
MATCH Extension Card slot
It is possible to extend the functionality of the MATCH PP 62DSP amplifier by inserting an optional MATCH Extension Card (MEC) - for example a Bluetooth®Audio Streaming module, an optical digital input or an AUX input.

Smart highlevel input
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If an usual amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) are often the result - but not with the PP62DSP.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Power Save Mode
The Power Save Mode is incorporated in all car-specific setups as well as in the basic setup of the DSP PC-Tool software. It allows to significantly reduce the power consumption of the PP 62DSP (or any additional connected amplifier) once there's no input signal for more than 60 seconds. Please note that in many up-to-date cars with CAN or any other internal bus structures it may happen that the car radio (and therefore the PP 62DSP as well) remains invisibly turned on for up to 45 min. after leaving the car!
Once the Power Save Mode is active the output stages of the PP 62DSP and its remote output will be turned off, thus reducing current draw to less than 250 mA. The amp will turn again to full operation within 2 sec. if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the Power Save made via the DSP PC-Tool.

MicroSD
The MicroSD card reader allows to easily configure the DSP inside the amplifier without the need of directly connecting a personal computer. A large number of car-specific setups is available for free on www.audiotec-fischer.com.
Simply download your desired setup and copy it to any MicroSD card. Finally insert the MicroSD card into the PP 62DSP and the copy process will start automatically. After that the amplifier is perfectly programmed to dramatically upgrade the sound quality of your car factory audio system.

Note:
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed