Citroen C1/Peugeot 108/Toyota Aygo (14-21) Double DIN fitting kit (WITH SWC & CAMERA RETENTION)


Sale price£179.99


Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls on Citroen C1, Peugeot 108 and Toyota Aygo (2014-2021) car models.
This fitting kit will also retain the factory-fitted reverse camera, as well as USB and AUX functions (if the vehicle is equipped)

This head unit fitting kit includes:

Toyota to DIN car aerial antenna adapter (21-147)

This cable adapts from the 2009 onward style Toyota antenna connection at the back of the car's original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade.

The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn-on output on the new stereo. This will turn on the original antenna amplifier in the car.

USB retention cable (24-250)

Allows you to maintain the car's existing USB socket and use it with a new aftermarket head unit.

This unit uses the car's original housing. Works on all newer Citroen, Peugeot and Toyota Aygo cars with an original USB socket.

Camera retention interface (27-272)

Allows you to retain the original OEM camera on Toyota Aygo, Peugeot 108 and Citroen C1

Comes complete with a 12v-6v voltage dropper built-in, which can simply be connected to the ISO harness for power.

Suitable for original head units with 4-pin camera connector. Will only fit cars with 4 pin camera connection to actual head unit. Not all original head units feature this connection.

The reverse signal to trigger the new head unit to switch over to the reverse camera is not on this interface. This is available on the 29-707 steering wheel control interface for the Toyota Aygo, Peugeot 108 and Citroen C1.

PLEASE NOTE: Suitable for cameras from original fitment X-Touch and X-Nav head units

Steering wheel control interface (29-707)

Steering wheel control interface and adapter cable Citroen C1, Peugeot 108 and Toyota Aygo cars 2014 onwards

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The cable also provides a speed pulse (for GPS) reverse output (for an aftermarket reverse camera) and handbrake output signal to the new stereo. The AUX 3.5mm jack below the original radio is retained with this interface by connecting the left and right inputs (2 RCAs) found on the back of most double DIN aftermarket radios that don't feature an AUX jack on the front panel. The USB can be retained with part 24-250.

The cable adapts from the connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

The steering wheel control interface is built into the adapter cable for a plug-and-play installation.

The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons.

Compatible with the following car models:

Citroen C1 (2nd Gen) (2014 - 2021)

Peugeot 108 (2014 - 2021)

Toyota Aygo AB40 (2014 - 2021)

Universal patch lead (29-025)

Universal patch lead to be used with In-car Tec 29-series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head unit.

Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non-branded Chinese head units.

Double DIN fascia adapter (50-650)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the car's dashboard by matching the shape, style, size and colour of the original OEM factory-fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. this replaces the need for a fitting cage and gives a flush professional appearance to the installation.

Fits Citroen C1, Peugeot 108 and Toyota Aygo (2014-2022) car models.


PLEASE NOTE: This fitting kit fits Double DIN head units with a maximum depth of 80mm

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed