Alpine adventure premium sound system stage 1+2+3: front, radial speakers on dashboard + subwoofer under front console + amplifier for subwoofer. Made for campers: fiat Ducato iii, Citroen Jumper ii and Peugeot Boxer ii
Alpine Adventure Audio sound systems are designed to deliver excellent sound quality and match the needs of motorhomes and camping vans.
These systems feature new, innovative audio-technologies to achieve the best sound quality in your motorhome. Alpine offers a sound system upgrade in 3 stages for the Fiat Ducato 3 and the same platform of vehicles.
Stage 1 - speakers.
The SPC-R100-DU 12 cm Radial On-dash Speakers create an excellent sound stage in the cabin and strongly improve the vehicle’s sound quality. Especially vocals appear much clearer when listening to news or podcasts. They are compatible with Fiat Ducato 3, Citroën Jumper 2 and Peugeot Boxer 2.
The SPC-R100-DU is designed to overcome the audio limitations of the Fiat Ducato cabin. In the original system, the tweeter and woofer are placed far away from each other, resulting in an unbalanced audio appearance. Vocals are reproduced by the door speakers, which are covered by the legs of the driver and passenger. The Ducato doors have no internal sound-proofing, resulting in strong vibration noise of the inner door panel. Audio playback is also heard easily by neighboring motorhomes on a camping site, due to the missing sound-proofing. The basic concept of the SPC-R100-DU is adding full-range speakers on top of the dashboard, to overcome the mentioned issues from the ground up.
On-Dash Radial Speakers
The 12 cm radial full-range speakers are installed on top of the dashboard and replace the original Ducato tweeters. These speakers feature an inverted cone design, resulting in an excellent 360-degree sound radiation. They deliver excellent sound detail, especially for vocals. This really improves listening to news, podcasts or audiobooks, but also regular music tracks will sound more detailed and balanced.
Installing the SPC-R100-DU speakers on your dashboard is very easy. The included speaker brackets fit perfectly to the shape of the dash and get mounted with screws. Due to the very unique speaker design with an inverted cone, we could design the overall speaker very flat, therefore eliminating the need to cut any hole in the dash for the speaker basket or magnet. There are also cable adapters included, allowing a simple plug-and-play adaptation to the original tweeter cable harness.
You can increase your bass output and overall tonal balance with the SWC-D84S subwoofer system. By adding it to the SPC-R100-DU, you create the Crescendo Ensemble – stage 2 of the Ducato sound system. The subwoofer is integrated perfectly in the center console for a stealthy appearance.
The SWC-D84S is designed to overcome the audio limitations of the Fiat Ducato cabin. The vehicle’s doors have no internal sound-proofing, resulting in strong vibration noise of the inner door panel. Audio playback is also heard easily by neighboring motorhomes on a camping site, due to the missing sound-proofing. By adding this subwoofer to the center console, you can enjoy much deeper and cleaner bass and overcome the mentioned issues from the ground up.
The included steel installation bracket gets mounted to the center console structure below the original cup-holder. The subwoofer enclosure then slides in from the front and perfectly blends into the center console. A cable harness for simple plug-and-play connection to the radio is included. Note that the original cup-holder is mandatory for this installation and needs to be installed as well, if not originally available.
Included Plug-And-Play Wiring Kit
The SWC-D84S includes an ISO cable kit for head unit adaptation. It connects the two rear channels to drive the subwoofer. There is also a low-pass filter that gets connected in line to limit the bandwidth frequency for the subwoofer. This low-pass filter gets removed when upgrading to the Concert Ensemble with the SWA-150KIT.
The SWA-150KIT is a highly recommended upgrade for your SWC-D84S subwoofer system. By adding this amplifier kit, you complete the “Concert Ensemble” for your motorhome and you can enjoy great dynamics and exciting bass sound.
150 Watts Amplifier
The included amplifier features a max power output of 150 Watts. Each output channel drives one of the SWC-D84S’s voice coils, ensuring excellent dynamic and fast response speed. The amplifier is very compact and can be easily installed in the compartment behind the cup-holder.
Included Bass Remote
A bass remote knob allows quick access to the amplifier gain. The included controller gets installed in the dashboard and is connected by wire to the amplifier. This makes it very easy to adjust the bass according to the situation, such as driving on a noisy highway or when parked on a camping site.
Included Wiring Kit
Fiat Ducato III (250) 06/2006 →
Fiat Ducato III Facelift (250) 2011 - 2014
Fiat Ducato III (290) 2014 →
Citroën Jumper II (250) 06/2006 →
Peugeot Boxer II (250) 06/2006 →
Compatible with original radio and aftermarket head units.
If you own a liner motorhome, please check compatibility before purchase!
12 cm radial full-range speakers
Inverted cone for flat speaker design
Excellent 360-degree sound radiation
Included on-dash mounting brackets
Included cable adapter for adaption to original tweeter cable
Includes all required installation materials
Peak Power: 180 Watts
RMS Power: 45 Watts
Radial Speaker mounting diameter: 120 mm
Radial Speaker mounting depth: 12 mm
Radial Speaker height: 45 mm
Frequency response: 100Hz – 20kHz
Impedance: 4 Ohms
FEATURES subwoofer SWC-D84S:
20 cm flat subwoofer in sealed enclosure
Dual voice coil (2 Ohm + 2 Ohm)
Subwoofer features low power requirements
Included steel mounting bracket for center console installation
Included ISO adapter for adaption to the radio
Includes low-pass filter cable
Peak Power: 250 Watts
RMS Power: 2x 75 Watts (for each voice coil)
This woofer enclosure is designed to fit in the center console below the cup-holder
Frequency response: 30Hz – 200Hz
Impedance: Dual 2 Ohm
FEATURES amplifier for subwoofer SWA-15KIT:
Terminal Layout: One side
Small footprint for easy installation
Amplifier Type: Class-AB
Channel Design: 2-Channel Input (summed to mono)
Thermal Management Control
Speaker Level Input with remote turn on
Crossover: Low-pass filter (LPF)
Gain Control: Adjustable
Wired bass remote and wiring harness included
Max Power Output
Per Channel into 2 Ohms, 14.4V: 2 x 75W
Designed to work with SWC-D84S subwoofer system
Power Requirements: 14.4 V.DC (9 - 16 V allowable)
High Level Input with remote power on
Frequency response: 20 to 125Hz (+0/-3dB)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.