• MATCH MW 10W-D 10" / 25 cm subwoofer with dual voice coil

MATCH MW 10W-D 10" / 25 cm subwoofer with dual voice coil

MW 10W-D

If you prefer a different form factor for the sub enclosures you have the chance to easily build your “personalized” version by yourself. If you want to use your trunk volume optimal due to a car specific shaped enclosure, your own creation is ideally. As with the Plug & Play-Subwoofers the single chassis are 100% identical to the drivers that are used in the pre-loaded variants. Therefore a simple rule takes effect in this case - as long as your customized cabinet conforms to our specifications with respect to the net volume and the matching of the bass reflex channel, identical sound performance is guaranteed. Give free rein to your handcraft skills and build the perfect subwoofer for your car.

  • Extremely stiff, hand-scooped paper cone
  • Very long linear excursion
  • Double ventilated voice-coil for minimum compression effects and high power handling
  • Impedance 2 x 2 Ohms
  • Powerful magnet system for compact vented enclosures
Power handling RMS / max. 300 / 600 Watts
Impedance 2 x 2 Ohms
Voice coil diameter 50.8 mm
Voice coil winding height 24 mm
Max. linear excursion +/- 8 mm
Cone area 333 cm²
Moving mass 91 g
DC resistance 2 x 1.6 Ohms
Resonance frequency 36 Hz
Mechanical Q factor 4.50
Electrical Q factor 0.43
Total Q factor 0.39
Equivalent air volume 34 L
Voice coil inductance 2.2 mH
Force factor 12.3 Tm
Efficiency 1 W / 1 m 88 dB
Outer diameter 265 mm / 10.43“
Cutout diameter 232 mm / 9.13“
Mounting depth 128.5 mm / 5.06“
Recommended enclosure  
Sealed box  
Sealed net volume 12 L
Ported box  
Vented net volume 19 L
Port diameter 7 cm
Port area: 38 cm²
Port length 22 cm
Port tuning frequency 43 Hz
Speakers & Subs
  • Subwoofers
  • 10" (25cm)

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good

MATCH MW 10W-D 10" / 25 cm subwoofer with dual voice coil

  • £109.99