TP-70 DIY Tyre Pressure Monitoring System

The Steelmate TP-70 DIY tyre pressure monitoring system (TPMS) can be easily installed within minutes.
 

TP-70 Installed Within Minutes


The system comes with 4 screw on sensors and a cigarette plug display which shows the tyre pressures of all 4 tyres in PSI format in a circular scrolling motion. The cigarette plug display also has audible and visual warnings when a tyre pressure drops below or raises above the recommended level. All sensors come pre paired to the correct wheel position and are labelled for easy installation, simply screw each sensor onto the vehicle valve stem then lock in place with the provided locknut and tool.


This product is suitable for vehicles with Maximum tyre pressure of 3.3 Bar/47 PSI. If your vehicle has tyre pressures above this you will need to purchase a system from our professional range.

Sensors:
Operating Frequency: 433.92MHz
Battery Voltage: 3V
Battery Type: CR1632 (User Replaceable)
Operating Temperature: -20°C - +60°C
Pressure Range: 0-3.5 Bar / 0-50 Psi
High Pressure Value: 3.3 Bar/47 Psi
Low Pressure Value: 1.7 Bar/25 Psi

Display:
Operating Frequency: 433.92MHz
Operating Voltage: 12v (+/- 3v)
Operating Temperature: -40°C - +85°C

Driver Aids
  • TPS Tyre Pressure Monitor

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

TP-70 DIY Tyre Pressure Monitoring System

  • Brands Steelmate
  • Product Code: TP-70 DIY
  • Availability: Available
  • £79.99