Universal push fit rear view camera and 5 inch standalone monitor kit

A universal push-fit reversing camera is designed to be used on any vehicle with a 12v feed, with the camera having a built-in 6-volt adapter.

Its clever 20.5mm push-fit design means it fits perfectly on any under-hang surface, like just above a car number plate.

This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.

PLEASE NOTE: This camera will require a 20.5mm hole to fit into, a drill cutting tool will be required for this

Product information

• Universal fitment
• Front and rear view
• Push-fit design
• 20.5mm diameter
• 12v feed needed, built-in 6v adapter
• Colour CMOS image, NTSC.
• Parking guidelines: Optional
• IP68 Waterproof
• Includes power and video extension cables

Notes for installation fitting

Purple or White loop - Cut-loop to disable parking guidelines

Blue Loop - Cut-loop to switch to front view camera option

5 inch standalone windscreen video monitor with suction mount bracket

These monitors are great for installing an aftermarket reverse camera without affecting the original factory fitted system.

It comes with a 4-ratchet (4R) style mounting point for use with other 4R series mounts and brackets.

Main Features

• High brightness/resolution digital 5" wide-screen LCD panel applied.
• Super slim design, easy to mount on top of dashboard or window glass.
• Dual video input, standard RCA connectors. Shielding cables used to avoid signal interference when both channels are connected to cameras or video.
• Adjustable suction mount bracket.
• Adjustable brightness and colour intensity.
• Rear four ratchet (4R) style mounting point for use with other 4R series mounts and brackets. (see below picture.)
• Guidelines are only available when used with a camera with guidelines.

Specifications

• Screen type: TFT LCD
• Screen size: 5" colour
• Resolution:480*RGB*272
• Brightness:400cd/m2
• Display format: 16:9
• Video input: 2-channel
• Voltage: 12V

Installation

Can be powered from a 12v ignition or reverse feed.

Sometimes, the reverse power feed from the reversing lights may not be strong enough to power the monitor. A separate power feed relay (10-641) may be required to provide a better 12v power feed.