Add camera to Ford OEM Sync 2.5 (32 Pin connection) (CODING REQUIRED)

Reverse Camera interface adaptor for factory Ford SYNC 2.5 / SYNC 3 systems (version 3.0 / 3.2 / 3.3) with 7 or 8 inch monitor screen and new 32-PIN Ford connector

This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings.

This adaptor has 32 pin male and female connectors with a RCA Phono camera input. Disconnect the factory connector and connect our T-Harness inline.

PLEASE NOTE: Coding is required with Forscan to enable RVC function on Sync systems

Features

• For models with Ford Sync 2.5
• Models with 32 pin new Ford connection type
• Can only be used for cameras with NTSC video signal
• Simply plugs in-line without interrupting any cables
• Coding required with Forscan to enable RVC function on Sync system

Vehicle Compatibility

For models with Ford SYNC 2.5 / 3 with 32 pin new plug type only. SYNC 2.5 can usually be identified by the "Four icons" at the bottom of the touch screen (See main images). Another way to identify is via accessing the vehicles settings menu. Look up "About SYNC" under the "Settings Menu" and it should read SYNC (Also pictured).

• FORD C-max (2019-2022)
• FORD Ecosport (2019-2022)
• FORD Fiesta (2017-2022)
• FORD Focus (2018-2022)
• FORD Galaxy (2019-2022)
• FORD Kuga (2019-2022)
• FORD Mondeo (2019-2022)
• FORD Mustang (2019-2022)
• FORD Puma II. (2019-2022)
• FORD Ranger (2019-2022)
• FORD S-max (2019-2022)
• FORD Tourneo Custom (2019-2022)
• FORD Transit Connect [MK2] (2019-2022)
• FORD Transit Custom (2018-2022)
• FORD Transit [MK8 Facelift] (2018-2022)