Match UP 7DSP Plug & Play 7 Channel Universal Upgrade Amplifier with 8 Channel DSP

The UP 7DSP is the most powerful MATCH DSP amplifier and comprises our new ADEP.3 circuitry. It offers seven amplifier channels in total as well as an additional preamp output, which allows -in combination with its integrated 8-channel DSP- to perfectly drive individual and complex speaker configurations. Two of the output channels deliver 160 Watts RMS into 2 Ohms - plenty enough for fuelling even large subwoofers.

But brute force is nothing without "smart control" - that's why the UP 7DSP incorporates a stunning powerful 64 Bit DSP of the latest generation, which enables to realize all-new revolutionary and proprietary sound features like the Augmented Bass Processing, the StageXpander or the RealCenter function. Take us by our word - you will experience a truly breathtaking sound performance.

But that's not enough - simply enjoy music from your smartphone in unprecedented quality. The UP 7DSP comes up with a MATCH Extension Card slot (MEC) for additional input and output interfaces like e.g. our Bluetooth Audio Streaming module or a High Resolution Audio USB sound card.Thanks to our professional and user-friendly DSP PC-Tool software V4 the configuration and set-up of the UP 7DSP is pretty straightforward and intuitive.

FEATURES:

• 7-channel Class HD upgrade amplifier with integrated 8-channel 64Bit DSP for universal applications
• MATCH Extension Card slot (MEC) for additional input / output modules like Bluetooth Audio Streaming, High Resolution Audio Streaming via USB etc.
• Smart highlevel input with ADEP.3 circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function
• Unique DSP features such as the Augmented Bass Processing which dynamically optimizes the bass response of the subwoofer, the StageXpander that significantly widens the stereo perspective, the RealCenter function, which allows a perfectly focussed sound staging for both driver and co-driver and much more
• Easy configuration via the intuitive DSP PC-Tool software
• Start-Stop capability down to 6V supply voltage
• Optical input in SPDIF format with sampling rate between 12 and 96 kHz
• Mono RCA output for the connection of an external amplifier e.g. subwoofer amplifier
• Compact dimensions and low heat dissipation thanks to maximum efficiency

SPECIAL FEATURES:

• Class HD technology
• The UP 7DSP combines the advantages of a Class H technology with the principle of a class D amplifier. The result is an unsurpassed efficiency which easily outperforms any conventional Class D amplifier. By varying the internal supply voltage depending on the amplifiers amplitude of the input signals, idle losses are significantly reduced and overall efficiency is close to maximum at any time.

• Smart highlevel input ADEP.3
• Modern, factory-installed car radios incorporate sophisticated possibilities of diagnosing the connected speakers. In particular the latest generation of car radios are equipped with additional monitoring functions so that failure messages and loss of specific features (e.g. fader function) quite often appear if an amplifier will be hooked up - but not with the UP 7DSP.
• The new ADEP.3 circuit (Advanced Diagnostics Error Protection, 3rd Generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

• Start-Stop capability
• The switched power supply of the MATCH UP 7DSP assures a constant internal supply voltage even if the batterys voltage drops to 6 Volts during engine crank. If the supply voltage drops below 10.5 Volts for more than five seconds the amplifier goes to Protect mode (Status LED lights up red) in order to avoid any further discharge of the cars battery.

• Automatic Digital Signal Detection
• Switching from analog input to the digital input is done automatically as soon as a signal is detected on the Optical Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.

• Power Save Mode
• The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the UP 7DSP and potentially connected amplifiers once theres no input signal present for more than 60 seconds. Please note that in many up-to-date cars with CAN or any other internal bus structures it may happen that the radio remains invisibly turned on for up to 45 min. even after locking and leaving the car! Once the Power Save Mode is active the remote output and therefore the connected amplifiers will be turned off. The MATCH UP 7DSP will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the Power Save Mode via the DSP PC-Tool software.

IN THE BOX

• 1 x MATCH UPGRADE amplifier UP 7DSP
• 2 x Connection cable
• 1 x Mounting plates & material
• 1 x USB cable
• 1 x Instruction manual