Audison Prima APBX 10 DS - 10" Bass Reflex Enclosure Box Bass Subwoofer 800W

This beautiful piece of luggage compartment furniture not only looks the business but produces unbelievable bass despite its small 12 Litre volume. Connections allow installer to wire both on board voice coils in parallel presenting a 2 Ohm load or run separately as two 4 Ohm. Temporary removable possible if necessary, but once experienced, you won't want to be without it!

The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 Ω dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2-ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speaker’s high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.

1 Ultra-low profile (5.6 in. / 142 mm) box with sealed design
perfectly tuned to fully exploit the APS 10 D driver.

2 2S² (2 Sides/2 Sounds) design provides the ability to choose
between Down-Firing mounting to increase the low-frequency
extension and Up-Firing install to obtain more punch and

3 Leveling feet with velcro inserts included for a secure grip with the
carpet while maintaining easy removal.

4 SSP (Sub Smart Plug) features both traditional push contacts and
a Plug-&-Play terminal block to easily configure the impedance as
required and provides a quick release.

5 Rounded corners allow easy positioning in the trunk and act as
reinforcement to reduce enclosure resonance.

6 Special designed cone-dustcap-basket geometry which
guarantees a long linear excursion capability (11 mm, one-way).

7 Massive driver motor assembly, optimized with FEM (Finite
Element Modeling) for perfect control under high excursion

8 Water-repellent treated paper 10 in. cone, featuring a profile
developed with FEM simulation and optimized with the Klippel
Scan Vibrometer.

9 Specifically developed to be combined with either the AP8.9 bit
(2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D
(2 CH bridged) amplifiers taking advantage of the bass boost
feature and integrated parametric equalizer of the built-in DSP.

10 Sturdy metal grid included for a total protection of the subwoofer

  • Size 200 mm (8'')
  • Power Handling 250 W Continuous Power
  • 500 W Peak Power
  • Impedance 4 Ω + 4 Ω
  • Sub box size mm (in.) 377 (14.84) x 334 (13.15)x 109 (4.29)
  • MagnetHigh density flux ferrite
  • Cone Cotton-Fibre pressed paper
  • Weight of one component kg (lb)6,22 (13.71)

Audison Prima APBX 10 DS Manual (.PDF)

Detailed Specification (.PDF)

  • 10" (25cm)

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good

Audison Prima APBX 10 DS - 10" Bass Reflex Enclosure Box Bass Subwoofer 800W

  • £329.99