• Alpine PDX-V9 4-channel + Mono Digital Power Amplifier

Alpine PDX-V9 4-channel + Mono Digital Power Amplifier

New Reference Grade Output Stage

PDX amplifiers come with easy-to-remove trim rings, so if you would like to customize them, you can have them painted. Add it as another Do-It-Yourself project, or leave it to professionals and ask an Authorized Alpine installer near you. The removable trim ring can be custom painted to match your vehicle or personalized to anything you want.

 Install

  •     Connectors: Quick Connect Terminals for Power Supply and Speaker Output
  •     Terminal Layout: One-Sided
  •     Mounting Design: Easy Stacking and Smart Installation


General

  •     Amplifier Type: Class-D (Digital)
  •     Channel Design: 4-channel + 1-channel (Mono)
  •     Thermal Protection
  •     Low-battery Protection
  •     Power Supply: DC-DC PWM Power Supply
  •     Board Circuitry: S.T.A.R. Circuit
  •     Current Protection: Auto Over Current Protection
  •     Power Indicator: Top Mounted LED Power/Status Indicator
  •     Crossover: Variable High Pass, Low Pass and Band Pass Filter
  •     Input Channel Mode Setting (CH1/2 & CH3/4):
  •     Input Channel Mode Setting (Subwoofer)
  •     Subsonic Filter: Variable Subsonic Filter
  •     Pre-Amp Stage: Discrete
  •     Final Outputs: MOSFET
  •     Board Design: 6-Layer Glass Epoxy PC Board
  •     Bass Control: Remote Bass Control (RUX-KNOB) Ready


 Max Power Output Ratings

  • Total Max Power: 1600W


RMS Power Ratings

  •     Per Channel into 4ohms, 14.4V (>THD+N): 100W RMS x 4 + 500W RMS x 1
  •     Per Channel into 2ohms, 14.4V (>THD+N): 100W RMS x 4 + 500W RMS x 1
  •     Bridged into 4ohms, 14.4V (>THD+N): 200W RMS x 2

 

Sound Tuning

  •     Crossover (CH1/2, HPF): 30 - 600 Hz (x1), 300 - 6kHz (x10), -12 dB/oct.
  •     Crossover (CH3/4, HPF): 30 - 600 Hz, -12 dB/oct.
  •     Crossover (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6kHz (LPF, x10), -12 dB/oct.
  •     Crossover (Subwoofer): 50 - 600 Hz, -24 dB/oct.
  •     Subsonic Filter: 3 - 30 Hz, -24 dB/oct.

General

  •     Power Requirements: 14.4 V.DC (11-16 V allowable)
  •     Input Sensitivity (RCA Input): 0.2 - 4V (CH1/2, CH3/4), 0.1 - 4V (Subwoofer)
  •     Input Impedance: >10k ohms
  •     Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 3 - 100kHz
  •     Frequency Response (+0, -3dB: 1W into 4 ohms) for Subwoofer: 3 - 600 Hz
  •     THD+N (10W into 4 ohms) for CH-1/2/3/4: ?0.005%
  •     THD+N (10W into 4 ohms) for Subwoofer: ?0.006%
  •     THD+N (Rated Power into 4 ohms) for CH-1/2/3/4: ?0.03%
  •     THD+N (Rated Power into 4 ohms) for Subwoofer: ?0.05%
  •     Damping Factor for CH-1/2/3/4: >500 into 4ohms at 100Hz
  •     Damping Factor for Subwoofer: >1000 into 4ohms at 100Hz
  •     Signal to Noise (Rated Power into 4 ohms) for CH-1/2/3/4: 112 dB
  •     Signal to Noise (Rated Power into 4 ohms) for Subwoofer: 119 dB
  •     Weight: 2.7 kg

Dimensions

  •     Footprint: 257 x 50.8 x 192 mm
Amplifiers
  • Amplifiers
Channels
  • Multi Channels

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Alpine PDX-V9 4-channel + Mono Digital Power Amplifier

  • Brands Alpine
  • Product Code: PDX-V9
  • Availability: Available
  • £549.99