AudioControl lc2i pro Channel Line Output Converter inc AccuBASS Processor

Maximum Bass Response From Factory Installed Audio Systems

The LC2i PRO join ranks with AudioControl’s most popular active line output converter, the LC2i. Adding a sub? Planning a full system? Either way, get the best possible signal from your factory sound system to your amplifiers. Load selection switches mean OEM integration has never been easier and the LC2i PRO will work with the most finicky factory sound systems. Installer friendly turn on trigger modes allows for flexibility via GTO™ Signal Sense (DC offset), audio sense, or remote 12-volt inputs. Compensate for factory bass roll-off with AudioContol’s patented AccuBASS® and control your sub with the included ACR-1 level control.

A fantastically featured two-channel line output converter. Accepts two channels form any OEM head unit or amplifier. A switchable load switch adding additional versatility. AudioControl's patented AccuBASS bass restoration system ensures that any built-in bass reduction can be corrected before amplification. Comes complete with ACR 1 remote sub level control.

Features

  • Two channels of active speaker level inputs (up to 40V input handling)
  • Fixed and variable outputs with discrete level controls
  • AccuBASS® processing for correction of bass roll-off
  • Load Selection Switch
  • GTOTM Signal Sensing
  • Ground Isolation Switch
  • ACR-1 dash remote included
  • Compact design


Technical Specification  Tech Manual.pdf

  • Speaker Level Input: 1 (2 channels)
  • Maximum Speaker Level Input: 40 Vrms / 400 W (20k ohm setting)
  • Input Impedance (selectable): 20 ohms, 60 ohms, 20k ohm outputs
  • Preamp Outputs: 2 (2 channels main, 2 channels bass)
  • Maximum Output Level: 9.5Vrms/13V peak
  • Output Gain: +/- 12 dB
  • Output Impedance: 150 ohm
  • performance
  • Total Harmonic Distortion: 0.01%
  • Signal to Noise: >110 dB
  • Frequency Response: 20 Hz – 50 kHz ±1 dB
  • control
  • Remote In / GTO™ Signal Sense / Audio Sense
  • 12VDC Remote Out (always active when the unit is on)
  • general
  • Current Draw: 200 mA
  • Recommended Fuse Rating: 1 A
  • weights & dimensions
  • Dimensions: 6.9 inches L x 3 inches D x 1 inch H (including speaker connectors)
  • Weight: 0.75 lbs. (0.34 kg)

Amplifiers
  • Processors & EQ

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

AudioControl lc2i pro Channel Line Output Converter inc AccuBASS Processor

  • Brands Audio Control
  • Product Code: LC2i PRO
  • Availability: Available
  • £169.99
  • £148.99


Related Products

AudioControl LC2i Channel Line Output Converter inc AccuBASS Processor

AudioControl LC2i Channel Line Output Converter inc AccuBASS Processor

Maximum Bass Response From Factory Installed Audio Systems The LC2i, is a compact, two-channel pr..

£108.99 £119.99

AudioControl LC6i Six Channel OEM interface

AudioControl LC6i Six Channel OEM interface

This unique product will accept two, four, or six channels of speaker-level signal from an amplifier..

£169.99

AudioControl LC7 Six Channel Line Output Converter.

AudioControl LC7 Six Channel Line Output Converter.

AudioControl LC7 Six Channel Line Output Converter With Auxiliary Input Open the door to better sou..

£209.99

AudioControl LC8 Eight Channel OEM Interface

AudioControl LC8 Eight Channel OEM Interface

The LC8 from AudioControl is the latest addition to our line of OEM interface products that connect ..

£254.99

AudioControl LCQ1 6 Channel Line Output Converter.

AudioControl LCQ1 6 Channel Line Output Converter.

Audio enthusiasts can now rejoice with the introduction of AudioControl’s LCQ-1, a powerful six-chan..

£349.99

Remote for AudioControl Processors ACR-1 & ACR-2

Remote for AudioControl Processors ACR-1 & ACR-2

ACR 1 for The Epicenter LC2i LC6i LC7i Matrix PLUS Overdrive PLUS 6XS ACR 2 for LC7..

£49.99

AudioControl ACR 3 Remote level control

AudioControl ACR 3 Remote level control

Add remote level control for your AudioControl processor or amplifier. This is the replacement remot..

£39.99

AudioControl LGD Dummy load and signal stabilizer

AudioControl LGD Dummy load and signal stabilizer

Add this to Audiocontrol devices with speaker input to stabilise the load on D-class amplifying circ..

£44.99