• Alpine PDX-M6 Mono Power Density Digital Amplifier

Alpine PDX-M6 Mono Power Density Digital Amplifier

New Reference Grade Output Stage

PDX amplifiers come with easy-to-remove trim rings, so if you would like to customize them, you can have them painted. Add it as another Do-It-Yourself project, or leave it to professionals and ask an Authorized Alpine installer near you. The removable trim ring can be custom painted to match your vehicle or personalized to anything you want.


  •     Connectors: Quick Disconnect Terminals (Power Terminal and Speaker Terminals)
  •     Terminal Layout: One-Sided
  •     Mounting Design: Easy Stacking and Clean-look installation
  • General
  •     Amplifier Type: Class-D (Digital)
  •     Channel Design: 1 Channel (Mono)
  •     Thermal Protection
  •     Low-battery Protection
  •     Power Supply: Resonant Mode Power Supply
  •     Power Supply Design: DC-DC PWM Power Supply
  •     Board Circuitry: STAR Circuit
  •     Current Protection: Auto Over-Current Protection
  •     Power Indicator: Top Mounted Blue LED Power/Status Indicator
  •     RCA Output: Non-Fading Pre-Amp Output
  •     Crossover: Adjustable Low Pass
  •     Pre-Amp Stage: Discrete
  •     Final Outputs: MOSFET
  •     Board Design: 6-Layer Glass Epoxy PC Board
  •     Gain Control: Adjustable
  •     Bass Control: Remote Bass Control (Sold Separately)

 RMS Power Ratings

  •     Per channel into 4 Ohms: (@14.4V >THD+N) 600W x 1
  •     Per channel into 2 Ohms: (@14.4V >THD+N) 600W x 1

Sound Tuning

  •     Crossover: Variable, 50-400Hz (-24dB / oct ), (Variable, L.P.F Only, 1/2 ch)
  •     Subsonic Filter: OFF / 15Hz / 30Hz


  •     Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm


  •     Power Requirements: 14.4V DC (11V to 16V)
  •     Input Sensitivity: Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
  •     Cable size: 25 mm² (BATT and GND), 4 mm² (Remote), Up to 10 mm² (Speaker)
  •     Frequency Response: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ?)
  •     Speaker Impedance: 4 or 2 ?
  •     Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4?) 95 dBA
  • Amplifiers
  • 1 Channel (Mono)

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good

Alpine PDX-M6 Mono Power Density Digital Amplifier

  • £439.99