Retrosound San Diego Pontiac Chrome Style Bluetooth
Motor 6
San Diego Classic DAB is the only Made-For-iPod/iPhone radio for your vintage, and also features built-in Bluetooth connectivity for hands-free phone calls and wireless audio streaming. Long Beach features a 32,000 colour display to customize your radio to your vehicle's interior. Two USB ports for iPod/iPhone plus two standard auxiliary inputs are included. Long Beach has a built-in 25 watts x 4 channel power RMS MOSFET amplifier as well as front and rear RCA pre-outs, plus subwoofer output, to add external amplifiers. It mounts seamlessly into your dash thanks to RetroSound's patented InfiniMount adjustable bracket system. Made for iPod/iPhone
- Built-in Bluetooth connectivity
- 32,000 colour display
- Authentic push-button styling
- AM/FM RDS tuner with 30 presets
- Built-in DAB/DAB+ tuner
- Two rear-mounted USB ports for iPod/iPhone or USB flash drive
- Two auxiliary inputs for portable devices
- 25 watts x 4 channel RMS power amplifier
- Dual RCA pre-outs plus subwoofer output for external amplifiers
- Patented InfiniMount adjustable shaft system
- The body can be mounted remotely for custom installation using an optional extension cable
- Works seamlessly with any of the Retrosound amplifiers
Spec
- Built-in Bluetooth for hands-free calling and wireless audio streaming
- AM/FM tuner with 30 pre-sets
- Single USB port for MP3/WMA music files via flash drive
- Two auxiliary inputs for portable devices
- Enhanced 32,000 colour LCD display
- 25 watts x 4 channel RMS power amplifier
- Dual RCA pre-outs for external amplifiers
- Patented InfiniMount adjustable shaft system
- The body can be mounted remotely for custom installation using an optional extension cable
- Power antenna lead and amp turn on lead included
- Made for iPod / iPhone Compatibility No
- Built-In Bluetooth Yes
- USB Port for WMA/MP3 Music Files 1
- Auxiliary Inputs for Portable Devices 2
- Display 32,000 colours
- AM/FM RDS Tuner with 30 Pre-sets No RDS
- DAB +
- Selectable Tuner with USA/EU/Japan Frequencies Yes
- Power Output 25W x 4Ch
- Front and Rear RCA Low Level Pre-amp Outputs Yes
- Subwoofer Output with Variable Crossover No
- Selectable 12/24 Hour Clock Yes
- General
- Dimensions (radio face & push-buttons only) 3.5”W x 1.5” H x 1.05” D
- Dimensions (radio body) 3.96”W x 1.98”H x 4.30”D
- Power Requirements 11.5-14.4 volts
- Current Consumption (during operation) Max. 15A
- Current Consumption (car off) <3.5 mA
- Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) 25x4 watts RMS 45x4 Max Power
- Output Impedance 4-8ohm
- AUX Input (AUX cable length, 8”) >300 mV / 6 kΩ
Video (How to Assemble Your RetroSound Radio)
.
Retrosound San Diego Pontiac Black Style Bluetooth
*** PLEASE NOTE: ONLY SUITABLE FOR NEGATIVE EARTH VEHICLES ***