Park Safe Commercial Vehicle Parking Sensor Kit PS114.1
With a wireless Control Box to Display Communication, The sensors can either be mounted into a bumper or under the bumper with the supplied underhung brackets.
The Ultrasonic Detection System is strictly meant as a driver aid, and the driver is still responsible for SAFE and CORRECT driving.
What is Wireless Ultrasonic Detection System?
The Wireless Ultrasonic Detection System is a modern supervisory system that uses ultrasonic technology to eliminate blind spots for commercial vehicle drivers.
The functional principle is based on the ultrasonic echo-transit time method. Each of the sensors will emit a steady intermitting ultrasonic signal.
The sensors operate as both transmitters and receivers, which will receive the beamed and reflected ultrasonic signals from possible obstacles.
How does it work?
The Wireless Ultrasonic Detection System can be fitted to the BACK of the vehicle. The system is activated by engaging reverse gear. When the system is activated, the sensors will constantly scan the surroundings of the vehicle and if there is any obstacle detected, the in-cabin display will send progressive visual and audible warnings to the driver. The driver shall then pay extra attention to the hazard area and maneuver the vehicle accordingly.
Why is it better?
The wireless feature of the system means that there is no cabling needed from the control unit to the in-cabin display, therefore, the cabin display, therefore,
What is it compatible with?
The system comes with an IP69K ECU box and IP68 sensors and connectors, so it is suitable for all types of commercial vehicles such as HGVs, LGVs, vans, and buses.
The 12/24Vdc dual voltage feature means that it can be connected to vehicles with either 12V or 24V power supply.
The wireless system is ideal for a fleet of trailers as there is no cabling between tractor and trailer. Any tractor fitted with the display will be able to receive the wireless signal from the control unit at the back of the trailer.
Description
-
Wireless rear parking sensor system for commercial vehicles with underhung brackets and LED display.
Key Specifications:
- Voltage: 9 ~ 35V
- Operating temperature: -20°c ~ +80°c
- Detection range: up to 2.5m
- Frequency: 39.3 ~ 40.7 Khz
- Operating current: 150mA
- RF Frequency: 433 Mhz
Additional Specifications:
- 2.4m (Male to male) sensor cable(s)
- Display cable: 1.5m
- Sensor colour: Matt black
- Sensor mounting height: 40 ~ 60 cm
- Detection angle: Vertical 60° & Horizontal 120°
- IP Rating: IP68
- E-Marking
Approvals & Certifications: EMark CE
Box Contents:
4 x 18.8mm Low profile angled sensor heads; 4 x Rubber sensor heads; 4 x Under hung brackets; 3 Colour LED display with Buzzer & mute function; 2 Volumes & off; Self test function.