DBA 201 F High-performance super flat.
Coming soon: January 2024. Pre-Order Now
The DBA 201 F flat active subwoofer enclosure optimized with FEM simulation ensures superior performance, maximizing the subwoofer output with a super flat size. The massive magnet of the 8-in. driver provides optimal control during the highest cone excursion.
Extra-full set of controls to fine-tune the in-car performance
The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 F to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 F and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping.
Auto-turn-on and standby modes
The built-in audio sense circuit allows the DBA 201 F to turn on and time out to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available.
Technical Specs
| Size mm (in.) | 200 (8) |
| Power Handling - Continuous W | 220 |
| Power Handling - Peak W | 440 |
| Impedance Ohm | 0.4 |
| Design | Super Flat Sealed |
| Voice Coil Ø | 38.6 (1.52) mm (in.) |
| Frequency Response Hz | 32 ÷ 400 |
| Magnet size D x d x h mm (in.) | 110 x 45 x 17 (4.33 x 1.78 x 0.67) |
| Weight of one component kg (lb.) | 4.3 (9.48) |
| Magnet | High Density Flux Ferrite |
| Cone | Pressed paper |
| Voice Coil Type | Copper |
Operating voltage VDC (Fuse) 6.5 ÷ 18 (15A) Start - Stop voltage VDC 6 Idling current A (Power OFF) 260 m (1 m) Consumption @ 14,4 VDC Max musical power A 8.5 Remote IN Turn on VDC (Current) 4 (1 mA) PRE input signal Turn ON VRMS 10 mV SPK input DC Turn ON VDC 2