The AP F1D amplifier was designed to drive the most demanding subwoofer and is the ideal extension of the AP F8.9 bit. At 1 Ohms it is stable and can supply up to 1000 W of power with extremely compact dimension.
Power Supply
- Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A
- Operating power supply voltage 6.5V ÷ 17V
- Idling current 1.3 A
- Consumption @ 14.4 VDC, 2Ω, Max Musical Power 50 A
- Remote IN 6 ÷ 15 VDC (1 mA)
- ART - Automatic Remote Turn on/off from
- OUTPUT BTL speakers (Selectable) 2 ÷ 7 VDC
Amplifier Stage
- Distortion - THD @ 100Hz, 4Ohm, 70% Rated Power: 0.1%
- Damping Factor @ 100Hz, 4Ohm, 2VRMS: 140
- Bandwidth @ -3dB: 10Hz - 500Hz
- S.N Ration (A weighted @ 1V Input): 110 dBA
- Input sensitivity Pre-in: Selectable 0.6 / 2.0 / 6.0 VRMS
- Input sensitivity Speaker-in: Selectable 2.0 / 6.5 / 20 VRMS
- Minimum Load Impedance: 1Ohm
Output Power (RMS) @ 14.4 VDC, 1% THD
- 1Ch @ 4Ohm: 500w x 1
- 1Ch @ 2Ohm: 800w x 1
- 1Ch @ 1Ohm: 1000w x 1
Inputs
- Pre-Amplified Inputs: Single RCA
- Speaker Level Inputs: Wired
- Mute Control (Energy Saving Control): Wired (active to ground)
Size: 238 x 49.5 x 155 mm (9.37 x 1.95 x 6.1 inch)
User Manual
Tech Sheet