Alpine MRP-F242 - £149.99 inc VAT
 Alpine - MRP-F242 - V-Power 4/3/2 Channel 75w x 4 or 180w x 2
Alpine - MRP-F242 Car Amplifier Save £50 on TSP
Features
- 2/3/4 Channel Operation
- BassEngine®
- Subsonic Filter
- Bass EQ Circuit
- Crossover (HP/LP)
- MOSFET Power Supply
- DC-DC PWM Power Supply
- Discrete Pre-Amp Stage
- Double Buffered Pre-Amp Input Circuitry
- STAR Circuitry
- MultiMode?
- Top Mounted Blue LED Power/Status Indicator
- Duo B Feedback Circuitry
- Continuously Adjustable Gain Control
- Speaker Level Inputs
- Gold Plated Power Screw Terminals
- Gold Plated Speaker Terminals
- Cross-Vented Chassis Design
CEA-2006 Power Rating
- CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 40x4
- RMS Power (at 14.4V THD+N, 20Hz-200Hz)
- Per channel into 4 ohms: 40W x 4 (0.08% THD)
- Per channel into 2 ohms: 50W x 4 (0.3%)
- Bridged 4 ohms: 100W x 2 (0.3%)
- Total Max. Power: 360W
- BassEngine® Sound Tuning
- Crossover Network: 18dB/oct
- Low/High Pass Crossover Frequency (Fixed): 80Hz
- Subsonic Filter (Fixed): 20Hz
- Bass EQ Frequency (Fixed): 50Hz
- Bass EQ Level (Adjustable): 0 - 12dB
General
- Power Requirements: 14.4V DC (11V to 16V)
- Frequency Response: 10Hz ? 50kHz (+0, -1dB)
- Signal to Noise (S/N): 100dBA (referenced to rated power)
- Input Sensitivity (For Rated Power): 0.2V to 4.0V
- Slew Factor: Greater than 5
- Input Impedance: 10k Ohm
- Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
- Dimensions (WxHxD): 232mm x 60mm x 267mm
- Dimensions (WxHxD): 9-1/5" x 2-2/5" x 10-1/2"
- Weight: 2.64 Kg. (5 lbs)
| 
